WarLocG

#! modo de compet

un nouveau système de fichier pour GNU/Linux: le BCACHEFS

What is bcache?

Bcache is a Linux kernel block layer cache. It allows one or more fast disk drives such as flash-based solid state drives (SSDs) to act as a cache for one or more slower hard disk drives.

Hard drives are cheap and big, SSDs are fast but small and expensive. Wouldn't it be nice if you could transparently get the advantages of both? With Bcache, you can have your cake and eat it too.

Bcache patches for the Linux kernel allow one to use SSDs to cache other block devices. It's analogous to L2Arc for ZFS, but Bcache also does writeback caching (besides just write through caching), and it's filesystem agnostic. It's designed to be switched on with a minimum of effort, and to work well without configuration on any setup. By default it won't cache sequential IO, just the random reads and writes that SSDs excel at. It's meant to be suitable for desktops, servers, high end storage arrays, and perhaps even embedded.

The design goal is to be just as fast as the SSD and cached device (depending on cache hit vs. miss, and writethrough vs. writeback writes) to within the margin of error. It's not quite there yet, mostly for sequential reads. But testing has shown that it is emphatically possible, and even in some cases to do better - primarily random writes.

It's also designed to be safe. Reliability is critical for anything that does writeback caching; if it breaks, you will lose data. Bcache is meant to be a superior alternative to battery backed up raid controllers, thus it must be reliable even if the power cord is yanked out. It won't return a write as completed until everything necessary to locate it is on stable storage, nor will writes ever be seen as partially completed (or worse, missing) in the event of power failure. A large amount of work has gone into making this work efficiently.

Bcache is designed around the performance characteristics of SSDs. It's designed to minimize write inflation to the greatest extent possible, and never itself does random writes. It turns random writes into sequential writes - first when it writes them to the SSD, and then with writeback caching it can use your SSD to buffer gigabytes of writes and write them all out in order to your hard drive or raid array. If you've got a RAID6, you're probably aware of the painful random write penalty, and the expensive controllers with battery backup people buy to mitigate them. Now, you can use Linux's excellent software RAID and still get fast random writes, even on cheap hardware.

User documentation - Documentation/bcache.txt in the bcache kernel tree.

Troubleshooting performance

Design and code documentation

FAQ

Articles about bcache

Old status updates

Features

    A single cache device can be used to cache an arbitrary number of backing devices, and backing devices can be attached and detached at runtime, while mounted and in use (they run in passthrough mode when they don't have a cache).
    Recovers from unclean shutdown - writes are not completed until the cache is consistent with respect to the backing device (Internally, bcache doesn't distinguish between clean and unclean shutdown).
    Barriers/cache flushes are handled correctly.
    Writethrough, writeback and writearound.
    Detects and bypasses sequential IO (with a configurable threshold, and can be disabled).
    Throttles traffic to the SSD if it becomes congested, detected by latency to the SSD exceeding a configurable threshold (useful if you've got one SSD for many disks).
    Readahead on cache miss (disabled by default).
    Highly efficient writeback implementation; dirty data is always written out in sorted order, and if writeback_percent is enabled background writeback is smoothly throttled with a PD controller to keep around that percentage of the cache dirty.
    Very high performance b+ tree - bcache is capable of around 1M iops on random reads, if your hardware is fast enough.
    Stable - in production use now.

sources:
http://thehackernews.com/2015/08/linux- … ystem.html
http://bcache.evilpiepirate.org/#index2h1
http://evilpiepirate.org/git/linux-bcac … bcache-dev

---

Avant de poser vos questions, jeter un oeil ici
Mon CodeVault et Wiki : ici
Les messages privés envers le staff sont uniquement pour les cas d'urgence ou affaires privées (personnelles). Les demandes se feront exclusivement sur le forum. Merci de respecter cette clause sous peine de sanctions.

IceF0x

#! Gourou Linux

Re : un nouveau système de fichier pour GNU/Linux: le BCACHEFS

Intéressant il faudrais tester à longterme sur le SSD pour voir sur la longévité.

---

Utiliser des logiciels propriétaires, c'est comme les plats préparés, on est incapable de dire les conservateurs qu'ils contiennent, on dira toujours que c'est bon, mais ça ne remplacera jamais le repas fait maison par sa maman.
]:D #! Crunchbang & Archlinux GNU/Linux User ]:D